Behold the Razer Tiamat 7.1, the world’s first circumaural gaming headset with 10 discrete drivers built-in to deliver the ultimate 7.1 Surround Sound experience. Dominate deathmatches when you can hear incoming enemy footsteps to prevent backstabs and pinpoint enemy locations through gunfire with absolute precision. No other surround sound headset has been engineered to produce such lifelike positional audio geared for the ultimate tactical advantage.


Total audio mastery in your hands. Set the volume, audio positioning and bass depth as you want via the audio control unit. Whether it’s configured to blast a full frontal wall of sound or scaled down to simple stereo, get the right level of intensity for your gaming audio every time.

FEATURES
Maximum comfort,
maximum durability
The Razer Tiamat 7.1's sturdy construction and padded leatherette ear cups ensure extended headset life and ultimate comfort so you can keep going during those hardcore marathon gaming sessions
Full audio customization
Easily and accurately fine-tune the level of each audio channel, position, and bass depth to your exact enjoyment using the supplied control unit.
7.1 surround sound with
lifelike positional audio
A world's first, the 10 individual drivers in the Razer Tiamat 7.1 provide immersive, crystal clear surround sound. The reproduced audio is so rich and lifelike that not only will you feel like you’re right there, you'll have the edge over your enemies. Let 'em try sneaking up on you now.
  • True-to-life 7.1 Surround Sound from 10 discrete drivers
  • All-in-one volume control unit for multi-channel customization and toggling between headset and speakers
  • Comfortable, snug fit for extended play
  • Retractable, noise-filtering unidirectional mic
  • Interchangeable ear cup covers
  • Replaceable soft-touch leatherette ear cushions
  • Braided fibre cable

Headphones
10 discrete neodymium drivers:
Sub woofer:
  • Drivers: 2 x 40mm Neodymium Magnets with Titanium Coated Diaphragm
  • Frequency Response: 20Hz – 20,000 Hz
  • Impedance: 16Ω
  • Sensitivity @ 1kHz: 116 dB ± 3dB
Front:
  • Drivers: 2 x 30mm Neodymium Magnets
  • Frequency Response: 20Hz - 20,000 Hz
  • Impedance: 32 Ω
  • Sensitivity @ 1kHz: 123dB ± 3dB
Rear:
  • Drivers: 2 x 20mm Neodymium Magnets
  • Frequency Response: 20Hz - 20,000 Hz
  • Impedance: 32 Ω
  • Sensitivity @ 1kHz: 120dB ± 3dB
Center:
  • Drivers: 2 x 30mm Neodymium Magnets
  • Frequency Response: 20Hz - 20,000 Hz
  • Impedance: 32 Ω
  • Sensitivity @ 1kHz: 123dB ± 3dB
Side:
  • Drivers: 2 x 20mm Neodymium Magnets
  • Frequency Response: 20Hz - 20,000 Hz
  • Impedance: 32 Ω
  • Sensitivity @ 1kHz: 120dB ± 3dB

Microphone
  • Frequency Response: 50 – 16,000 Hz
  • Sensitivity @1kHz: -36 dB ± 2dB
  • Signal-to-Noise Ratio: 50 dB
  • Pick-up Pattern: Unidirectional

Volume Control Unit
  • Master Volume, front speakers, centre speakers, sub-woofer speakers, side speakers, rear speakers, microphone volume, microphone mute, audio mute, 7.1 surround sound & 2.0 stereo mode toggle and speaker/headset toggle
  • Cable: 3 metres, braided fibre sheath
  • Micro-USB Audio-Out
  • Micro-USB Audio-In

PC Connector: Microphone-In, 4x Audio-Out
Speakers Connector: 4x Audio-Out, 1x Audio-In
System Requirements
  • PC with built-in 3.5mm audio jacks & 1 USB port
  • 7.1 Surround Sound-enabled Sound Card (for 7.1 Mode)
 
SETUP GUIDE

 

 
Question?
We can help
Why buy at the
RazerStore?
Copyright © 2013 Razer Inc. All rights reserved.
- Change Location
 
BODY MEASUREMENTS FOR TEES

RAZER T-SHIRT SIZING

Size
(in / cm)
Chest
Width
Waist
Width
Length Top
Sleeve
Bottom
Sleeve
Cuff
S 37 / 94 36 / 91.4 28 / 71.1 7.9 / 20.1 3.9 / 9.9 12.6 / 32
M 40 / 101.6 39 / 99.1 29 / 73.7 8.3 / 21.1 4.1 / 10.4 13.4 / 34
L 43 / 109.2 42 / 106.7 30 / 76.2 10 / 25.4 5.1 / 12.9 15.8 / 40.1
XL 46 / 116.8 45 / 114.3 31 / 78.8 10.6 / 26.9 5.5 / 14 16 / 40.6
XXL 49 / 124.5 48 / 121.9 32 / 81.3 11 / 27.9 5.9 / 15 16.6 / 42.2

HOW TO MEASURE YOUR BODY FOR TEES

1. Chest Width
Measure around the fullest part of your
chest, keeping the tape horizontal.

2. Waist Width
Measure around the narrowest part (typically
the small of your back and where your body
bends side to side) keeping the tape horizontal

3. Length
This is a vertical measurement from the shoulder
all the way to the bottom of the tee
4. Top Sleeve
This is a measurement from the shoulder to end of one sleeve

5. Cuff Circumference
Measure the circumference of your arm where it meets the cuff, or the edge of the sleeve.

CHOOSING THE RIGHT SIZE

If your body measurement is on the borderline between two sizes, order the smaller size for a tighter fit or the larger size for a looser fit.

If your body measurements for chest and waist width result in two different suggested sizes, order the size from your chest measurement.

 
 
BODY MEASUREMENTS FOR HOODIES

RAZER HOODIE SIZING

Size
(in / cm)
Chest Length Waist Arm Hood
S 40 / 101.6 26 / 66 33 / 83.8 22.5 / 57.1 13.5 / 34.3
M 42 / 106.7 27 / 68.6 35 / 88.9 24 / 61 13.5 / 34.3
L 44 / 111.8 28 / 71.1 38 / 96.5 28.3 / 71.9 13.5 / 34.3
XL 46 / 116.9 29 / 73.7 41 / 104.1 29.5 / 75 13.5 / 34.3
XXL 50 / 127 30 / 76.2 45 / 114.3 30.5 / 77.5 13.5 / 34.3

HOW TO MEASURE YOUR BODY FOR HOODIES

1. Chest Width
Measure around the fullest part of your
chest, keeping the tape horizontal.

2. Waist Width
Measure around the narrowest part (typically
the small of your back and where your body
bends side to side) keeping the tape horizontal

3. Length
This is a vertical measurement from the shoulder
all the way to the bottom of the hoodie

4. Top Sleeve
This is a measurement from the shoulder to end of one sleeve
5. Hood
This is the measurement from the top most point of the hood to the bottom just beneath the drawstrings.

CHOOSING THE RIGHT SIZE

If your body measurement is on the borderline between two sizes, order the smaller size for a tighter fit or the larger size for a looser fit.

If your body measurements for chest and waist width result in two different suggested sizes, order the size from your chest measurement.