Razer Kraken 7.1 - Buy Gaming Grade Headsets - Official Razer Online Store (United States)

For a limited time, all orders over US$59 will enjoy free shipping to the United States.

Get the complete 7.1 surround sound gaming experience with the Razer Kraken 7.1 USB gaming headset. This headset adopts the comfortable form factor of the Razer Kraken Pro, tested by numerous professional gamers to determine the optimal ergonomics for extended gaming sessions.

The full potential of the Razer Kraken 7.1 is unleashed by its advanced 7.1 virtual surround sound engine. Driven by Razer’s powerful Synapse 2.0 unified configuration software, this highly customizable engine modulates sound to simulate a 360⁰ surround sound experience, allowing you to precisely pinpoint directional audio to know exactly where your enemies are. The headset’s 40mm neodymium magnet drivers power a sound signature that features deep bass, warm mids and crystal-clear highs, for total gaming immersion.

Featuring a retractable microphone hidden in the left ear cup when not in use, the Razer Kraken 7.1 maintains a sleek form factor, all while protecting the microphone during transportation and storage. This flexible, omnidirectional digital microphone comes equipped with an optimized algorithm, promising a pristine voice quality unachievable through traditional analog microphones. Boasting an impressive signal-to-noise ratio and an extended wideband frequency response, the digital microphone ensures a clear, natural sounding voice reproduction with minimal noise.

Feast your ears on full blooded gaming audio with the Razer Kraken 7.1 surround sound gaming headset.

 

Features

Advanced 7.1 virtual surround sound engine

The Razer Kraken 7.1 comes equipped with an advanced 7.1 virtual surround sound engine that immerses you deeper into the game. The engine is capable of ultra-low latency audio processing and modulates the audio source to simulate a 360⁰ surround sound experience that is usually achievable only by incorporating more than one positional driver in each ear cup.

Razer’s powerful Synapse 2.0 unified configuration software is capable of a high degree of customization, allowing you to tweak the engine to specifically position each surround sound channel, boost bass levels and even balance incoming voice audio for astounding aural precision. The sophisticated engine also allows you to control surround and positional audio settings for each individual program, ensuring that you get the best possible experience whether you are playing a game, watching a movie or listening to music.

Learn more about Razer Synapse 2.0 and its various capabilities here.

 
 
 

Enhanced digital microphone

The left ear cup houses an enhanced digital microphone boom that pulls out only when you need it, maintaining the headset’s sleek form factor while protecting the microphone during transportation and storage. The flexible design and integrated mute button allow the microphone to be adjusted to individual needs, ensuring that it is always positioned the way you need it.

 

The omnidirectional digital microphone comes equipped with an optimized algorithm, promising a pristine voice quality unachievable through traditional antalog microphones. Boasting an impressive signal-to-noise ratio, extended wideband frequency response and higher sensitivity rating, the Kraken 7.1’s digital microphone is capable of:
- Crystal-clear voice reproduction
- Balanced, natural sounding vocal tone
- Minimal background noise pickup

Green – Razer Kraken 7.1’s digital microphone
Grey – Standard analog microphone

The balanced frequency response of the Razer Kraken 7.1’s digital microphone promises a clearer, more natural voice reproduction as compared to standard analog microphones.

 

Designed for extended gaming comfort

The Razer Kraken 7.1 surround sound gaming headset has been field-tested by countless professional gamers to determine the optimal ergonomics for extended gaming sessions. The foldable design allows you to quickly and conveniently stow away and carry the headset on-the-go. Combined with the plush leatherette padding on the ear cups, the Razer Kraken 7.1 immerses you in absolute comfort.

*This is a playback of a pre-recorded sample of a track virtualized through the Razer Kraken 7.1’s surround sound engine with default calibration compared to standard stereo. While it provides an incredible representation of advanced virtual surround algorithms, it will not give you the individually optimized positional audio that is customizable through Razer Synapse 2.0. To enjoy the best surround sound experience, installation and calibration of the Razer Kraken 7.1 drivers through Razer Synapse 2.0 is required.

  • Advanced 7.1 virtual surround sound engine
  • Enhanced digital microphone
  • Designed for extended gaming comfort
  • Razer Synapse 2.0 enabled
  • Powerful drivers for highest-quality gaming audio
  • Closed ear cup design for optimal sound isolation
  • Foldable ear cups for maximum portability
System Requirements
  • PC / Mac with USB port
  • Windows® 8 / Windows® 7 / Windows Vista® / Mac OS X (10.6-10.9)
  • Internet connection (for driver installation)
  • At least 100MB of free hard disk space
 
Headphones
  • Drivers: 40mm neodymium magnets
  • Frequency Response: 20Hz - 20kHz
  • Impedance: 32 Ω
  • Sensitivity @ 1kHz: 112dB
  • Output Power: 30mW
  • Connector: Gold plated USB
  • Cable Length: 2m / 6.56 ft braided USB cable
  • Approximate Weight: 340g
Microphone
  • Frequency response: 100Hz –12kHz
  • Sensitivity @ 1kHz: -40dB ± 4dB
  • Signal-to-noise ratio: 63 dB
  • Pick-up pattern: Omnidirectional
 
 
 

 

  • FREE Standard Shipping on orders over US$59 within the United States (lower 48 states only). Additional custom and tariff fees may apply for customers living outside the United States.
  • No Payments and No Interest if paid in full in 6 months on orders over US$200, when you pay with Bill Me Later® See terms »
 
 
Copyright © 2014 Razer Inc. All rights reserved.
 
BODY MEASUREMENTS FOR TEES

RAZER T-SHIRT SIZING (MEN)

Size
(in / cm)
Chest
Width
Waist
Width
Length
S 18.5 / 47 18 / 45.7 28 / 71.1
M 20 / 50.8 19.5 / 49.5 29 / 73.7
L 21.5 / 54.6 21 / 53.3 30 / 76.2
XL 23 / 58.4 22.5 / 57.2 31 / 78.7
XXL 24.5 / 62.2 24 / 61 32 / 81.3
XXXL 26.5 / 67.3 26 / 66 33 / 83.8


RAZER T-SHIRT SIZING (WOMEN)

Size
(in / cm)
Chest
Width
Waist
Width
Length
S 16 / 40.6 14.5 / 36.8 23 / 58.4
M 17 / 43.2 15.5 / 39.4 24 / 61
L 18 / 45.7 16.5 / 41.9 25 / 63.5

Before you start measuring, find a favorite t-shirt that fits you best and lay it flat on a table. You will be using that shirt as a reference point to the chart above on which of our apparel sizes will fit you best.

HOW TO MEASURE YOUR BODY FOR TEES

1. Chest Width
Measure the front of your shirt right under the
armpits from end to end.

2. Waist Width
Measure the narrowest part of your body as shown
on in the diagram on the right.

3. Length
This is a vertical measurement from the shoulder
all the way to the bottom of the tee.
CHOOSING THE RIGHT SIZE

If your body measurement is on the borderline between two sizes, order the smaller size for a tighter fit or the larger size for a looser fit.

If your body measurements for chest and waist width result in two different suggested sizes, order the size from your chest measurement.

 
 
BODY MEASUREMENTS FOR HOODIES

RAZER HOODIE SIZING (MEN)

Size
(in / cm)
Chest Length Waist Arm Hood
S 20 / 50.8 26 / 66.0 16.5 / 41.9 22.5 / 57.2 13.5 / 34.29
M 21 / 53.3 27 / 68.6 17.5 / 44.5 24 / 61.0 13.5 / 34.29
L 22 / 55.9 28 / 71.1 19 / 48.3 28.3 / 71.9 13.5 / 34.29
XL 23 / 58.4 29 / 73.7 20.5 / 52.1 29.5 / 74.9 13.5 / 34.29
XXL 25 / 63.5 30 / 76.2 22.5 / 57.2 30.5 / 77.5 13.5 / 34.29
XXXL 27 / 68.6 31 / 78.7 24.5 / 62.2 31.5 / 80.0 13.5 / 34.29


RAZER HOODIE SIZING (WOMEN)

Size
(in / cm)
Chest Length Waist Arm Hood
S 17 / 43.2 23 / 58.4 16 / 40.6 25 / 63.5 14 / 35.6
M 18 / 45.7 23.5 / 59.7 16 / 40.6 25 / 63.5 14 / 35.6
L 19.8 / 50.2 24.5 / 62.2 18 / 45.7 27.5 / 69.9 14 / 35.6

Before you start measuring, find a favorite hoodie (if you don’t have a hoodie use a t-shirt but bear in mind that hoodies should fit a bit looser) that fits you best and lay it flat on a table. You will be using that hoodie as a reference point to the chart above on which of our apparel sizes will fit you best.

HOW TO MEASURE YOUR BODY FOR HOODIES

1. Chest Width
Measure the front of your hoodie right under the
armpits from end to end.

2. Length
This is a vertical measurement from the shoulder
all the way to the bottom of the hoodie.

3. Hip Width
Measure the narrowest part of your body as shown on
in the diagram on the right.

4. Arm Length
This is a measurement from the tip of the shoulder
(where the stiches meet) to the end of the sleeve.

5. Hood
This is the measurement from the top most point of
the hood to the bottom just beneath the drawstrings.
CHOOSING THE RIGHT SIZE

If your body measurement is on the borderline between two sizes, order the smaller size for a tighter fit or the larger size for a looser fit.

If your body measurements for chest and waist width result in two different suggested sizes, order the size from your chest measurement.

 
 
BODY MEASUREMENTS FOR TEES

RAZER T-SHIRT SIZING (MEN)

Size
(in / cm)
Chest
Width
Waist
Width
Length
S 18.5 / 47 18 / 45.7 28 / 71.1
M 20 / 50.8 19.5 / 49.5 29 / 73.7
L 21.5 / 54.6 21 / 53.3 30 / 76.2
XL 23 / 58.4 22.5 / 57.2 31 / 78.7
XXL 24.5 / 62.2 24 / 61 32 / 81.3
XXXL 26.5 / 67.3 26 / 66 33 / 83.8


RAZER T-SHIRT SIZING (WOMEN)

Size
(in / cm)
Chest
Width
Waist
Width
Length
S 15 / 38.1 13.5 / 34.3 23 / 58.4
M 16 / 40.6 14.5 / 36.8 24 / 61
L 17 / 43.2 15.5 / 39.4 25 / 63.5

Before you start measuring, find a favorite tank top that fits you best and lay it flat on a table, if you don’t have a tank top use a t-shirt. You will be using that tank top as a reference point to the chart above on which of our apparel sizes will fit you best.

HOW TO MEASURE YOUR BODY FOR TANKS

1. Chest Width
Measure the front of your tank top right under the
sleeves from end to end.

2. Waist Width
Measure your waist at the same point as shown
in the diagram on the right.

3. Length
This is a vertical measurement from the collar
all the way to the bottom of the tee.

CHOOSING THE RIGHT SIZE

If your body measurement is on the borderline between two sizes, order the smaller size for a tighter fit or the larger size for a looser fit.

If your body measurements for chest and waist width result in two different suggested sizes, order the size from your chest measurement.